GroundWorx

Growing Degree Days

Heat is a clock. Learn to read it.

A sourced reference on growing degree days: what they are, why totals from different tools rarely match, example base temperatures, and how heat units guide development, pest and growth-regulator timing.

12 entries shown.

What a growing degree day is

How GDD works

A growing degree day (GDD) is a unit of accumulated heat. Plants and insects develop in response to warmth, so adding up daily heat above a minimum threshold tracks development more reliably than counting calendar days.

The detail

Each day contributes heat units based on how far the day's temperature rose above a chosen base temperature — the threshold below which development roughly stops. Accumulating those units over days gives a running total that correlates with growth stages. The base temperature is specific to the plant or insect being tracked, so a GDD total only means something when the base and method are stated with it.

Michigan State University Extension: Understanding growing degree-days

The simple average method

How GDD works

The most common calculation: add the day's high and low, divide by two, subtract the base temperature. If the result is negative, it counts as zero — development never goes backward.

The detail

GDD = ((daily high + daily low) ÷ 2) − base temperature. Some versions cap the daily high at an upper threshold for plants whose development stalls in extreme heat. The method is easy to compute from ordinary weather-station highs and lows, which is why extension services publish it widely — but it is an approximation, and different sources may handle caps and negative values differently.

Midwestern Regional Climate Center (Purdue University): Growing Degree Days

The sine (curve-fitting) method

How GDD works

A more precise approach fits a sine curve to the day's high and low to estimate how many hours were spent above the base temperature, rather than assuming the day's average tells the story.

The detail

Because temperature rises and falls through the day, a day with a brief hot spike can accumulate real development even when its simple average sits below the base. The sine method captures that by estimating the area under the temperature curve above the threshold. Pest-management degree-day models, including those published by UC IPM, commonly use this approach — which is one reason GDD totals from different tools may not match.

UC Statewide IPM Program: About degree-days

Why GDD totals from different sources rarely match

How GDD works

Change the base temperature, the calculation method, the start date or the weather station, and the accumulated total changes — sometimes dramatically. A GDD number is only meaningful with its assumptions attached.

The detail

Published GDD totals depend on: the base temperature chosen, whether an upper cap is applied, the calculation method (simple average vs. sine), the date accumulation starts, and which weather station's readings feed it. Comparing two totals without matching those assumptions is a common source of bad timing decisions. When you read a GDD recommendation, check which base and method the source used before applying it.

Michigan State University Extension: Understanding growing degree-days

Corn: base 50°F (10°C), upper cap 86°F

Example base temperatures

Corn development is commonly tracked with a base of 50°F and an upper threshold of 86°F — above that cap, additional heat is not counted because development no longer speeds up.

The detail

The corn GDD model is one of the most widely published examples: daily highs above 86°F are counted as 86°F, lows below 50°F as 50°F, and the result is averaged and subtracted from the 50°F base. Extension services use accumulated corn GDD to estimate silking and maturity timing. The specific thresholds are conventions for corn — other crops use different bases.

Purdue University Extension: Heat unit concepts related to corn development

Wine grapes: base 50°F (10°C)

Example base temperatures

Grape growing regions are classically compared using heat summation above a 50°F base, accumulated over the growing season — the basis of the Winkler region classifications.

The detail

The Winkler index sums daily degrees above 50°F from April through October (Northern Hemisphere) to group wine-growing regions into climate classes suited to different cultivars. It is a seasonal heat-summation convention for grapes — a useful regional comparison tool, but it says nothing about soil, water or site management, and other crops use other bases.

UC Master Gardeners (UC ANR): Grapes for Home Gardeners

Cool-season turf: low bases near 0–5°C

Example base temperatures

Turfgrass GDD models — especially for growth-regulator timing — often use very low base temperatures, sometimes 0°C (32°F), because cool-season grasses keep growing slowly at low temperatures.

The detail

Published turf GDD work uses bases ranging from about 0°C to 10°C depending on the species and the purpose of the model. A total accumulated on a 0°C base climbs far faster than the same weather on a 10°C base, so turf GDD recommendations are meaningless without the base stated. This is exactly why one product's GDD interval cannot be transferred to another product, species or model.

Cornell Turfgrass Program: Plant Growth Regulators

Alfalfa: base 41°F (5°C)

Example base temperatures

Alfalfa development is commonly tracked above a 41°F base, and accumulated GDD is used to help schedule harvests for target forage quality.

The detail

Extension programs publish alfalfa GDD accumulations from a seasonal start date so growers can compare the current year's heat accumulation against historical norms and time cutting. As with every GDD use, the base temperature and start date are conventions of the model — the number only helps when the same conventions are used consistently year over year.

Iowa State University Extension: Should I take a late fall alfalfa cutting?

Predicting plant development stages

How GDD is used

Because development tracks heat better than calendar dates, accumulated GDD is used to estimate emergence, flowering and maturity — and to compare whether a season is running ahead of or behind normal.

The detail

Seed catalogs and extension bulletins often rate crop varieties by the GDD they need to reach maturity, letting growers match varieties to their region's typical heat accumulation. Comparing this year's accumulation to a long-term average gives an early signal that pest pressure, harvest windows and application timing may shift earlier or later.

Montana State University Extension: Using Growing Degree Days to Predict Plant Stages

Timing pest emergence and treatment windows

How GDD is used

Insects are cold-blooded, so their development is even more heat-driven than plants'. Degree-day models predict when a pest reaches a vulnerable life stage, so monitoring and treatment land in the right window.

The detail

IPM programs publish degree-day targets for specific pests — for example, the accumulated heat at which a borer's eggs hatch or a scale's crawler stage emerges. Treatment aimed at the wrong life stage wastes product and misses the pest. Each pest model has its own base temperature and thresholds, published with the model; they are not interchangeable between species.

UC Statewide IPM Program: Degree-day models and pest management

Growth-regulator reapplication intervals

How GDD is used

Turf growth regulators lose effectiveness as the plant grows through them, so researchers have expressed reapplication intervals in GDD rather than weeks. One widely discussed example is roughly 200 GDD — but that figure belongs to specific products, species and base temperatures, and is not a universal rule.

The detail

Published turf studies express plant growth regulator longevity in accumulated GDD — the linked research tested roughly 200 GDD (base 0°C) for one product on creeping bentgrass putting greens. The right interval changes with the product and rate, the turf species, the base temperature and method used, and the level of suppression desired. Always follow the product label and the specific research behind any GDD interval — never transfer one product's number to another situation.

Kreuser, Cornell University (Michigan State University library archive): Use of Growing Degree Days to Re-apply Growth Regulators

What GDD does not tell you

How GDD is used

GDD tracks heat, not water. Two sites with identical GDD accumulation can need completely different irrigation — soil, rainfall, wind and humidity decide water demand, not heat units alone.

The detail

Heat accumulation is a development clock, not a water gauge. A cool, cloudy week and a hot, windy week can produce similar GDD while pulling very different amounts of water from the root zone. That is why GDD pairs naturally with measured root-zone moisture: GDD tells you where the plant is in its development, and soil moisture readings tell you whether the water is there to support it.

Michigan State University Extension: Understanding growing degree-days

4 entries

How GDD works

What a growing degree day is and the common ways it is calculated — methods differ, and the differences matter.

4 entries

Example base temperatures

Base temperatures commonly used for well-known plants. These are published examples, not universal constants.

4 entries

How GDD is used

How growers, turf managers and researchers put accumulated heat units to work.

Heat tells you when. Moisture tells you if.

This reference is general education from published sources — not site-specific advice. GDD tracks development, not water: measured root-zone moisture shows whether the water is actually there to support the growth the heat clock predicts.

Book a GAIN demo