Bidirectional by design
Read every reading, prediction, and recommendation out. Write irrigation events, maintenance activity, and third-party observations back in.
Protect living assets
Mature specimen trees, old-growth olives, and large date palms can take decades to replace — and they hide stress below ground long before the canopy shows it. The GX-1F Flex Sensor is the tree-specialized model in the GX-1 family and the only tree sensor that disappears entirely: fully standalone and wireless, it sits just under the surface with nothing visible above ground — no wiring, no above-ground hardware, nothing to detract from the landscape or invite damage. Its flexible sensor cord reaches 44 inches deep into the expansive root zone, with custom orders available up to 5 meters for the deepest rooting trees. It installs in minutes and works with or without the iQ SmartWell, then GAIN runs autonomously on top of it — turning raw readings into early warnings, forecasts, and watering decisions delivered without anyone having to pull data or build reports for arborists and land stewards.

Trees & Urban Forestry · Facility estimate · 50,000 mature trees
Live estimateA modeled 25% irrigation reduction for 50,000 mature trees — approximately 102,740 gallons potentially conserved per day, annualized.
Potential gallons conserved · Trees & Urban Forestry · estimated
50,000 mature trees only · not a global industry total · cumulative since October 9, 2026 · 00:00 UTC
~37.5M gallons / year
Potential annual water conserved for 50,000 mature trees
GAIN combines root-zone moisture, salinity, temperature, and weather context to predict irrigation need and reduce unnecessary watering.
Get a customized sensor planPlanning assumption: Extension rule of ~10 gal per inch of trunk diameter weekly; a 12" tree over a ~26-week season ≈ 3,000 gal per tree. These are illustrative facility benchmarks, not verified worldwide industry totals. The ticker spreads annual use evenly across 365 days and applies a 25% potential reduction. It is not measured live water waste, water already saved, or a guarantee. Actual needs and savings vary by climate, season, soil, and irrigation practice.
GAIN / Water savings estimator
US water rate region
Baseline annual use
150M gal
Estimated irrigation per year
Water conserved (25%)
37.5M gal
Modeled annual gallons conserved
Annual utility cost savings
$281,250 / yr
West · $7.50 per 1,000 gal
Estimate only, not a quote or guarantee. Basis: Extension rule of ~10 gal per inch of trunk diameter weekly; a 12" tree over a ~26-week season ≈ 3,000 gal per tree. Savings use a 25% reduction benchmark; annual utility savings use the selected modeled US regional water rate (West: $7.50 per 1,000 gallons), not a local utility quote. Map zones are schematic, not state-level service boundaries. Sources: GCSAA, USDA/USGS, and university extension irrigation benchmarks for water use. Actual results depend on climate, soil, water source, local utility rates, and current practices.
Get a customized sensor planWhat you are up against
What changes
Typical deployment
The hardware, up close



iQ SmartWell
The permanent in-ground well, RFID-enabled with BLE. Sensors install inside it and can be repositioned or swapped without re-digging.



GX-1F Flex Sensor — SmartWell install
This open configuration drops into the iQ SmartWell, sitting just under the surface with nothing visible above ground.
2-year warranty with SmartWell


GX-1F Flex Sensor — standalone
The fully standalone, wireless configuration: buried directly in the root zone with no well required.
1-year warranty standaloneOpen API
GAIN is built as an open, bidirectional platform. Root-zone telemetry streams out to any system you run, and context streams back in — irrigation run times, agronomic events, imagery, weather — so every prediction is made with the full picture. You own your data, and you can move it.
Read every reading, prediction, and recommendation out. Write irrigation events, maintenance activity, and third-party observations back in.
REST endpoints, webhooks, scoped API keys, and scheduled exports. If a platform speaks HTTP, GroundWorx can speak to it.
Raw and derived telemetry are exportable at any time, in open formats, to your own warehouse. No lock-in, no gatekeeping, no export fee.
Get started
Tell us about your site and we will walk through where sensors belong, what GAIN would watch, and what a first season looks like.